Fuel Gauge Driver

EV Works downunder makes a Fuel Gauge Driver for the original dashboard fuel gauge. The hardest part of the install was pulling the wire back to the fuel gauge sender. I used thermostate wire from home depot, 18/2, which has a double insulation. Once the wire was pulled and connected to the FGD I turned on the ignition switch and the gauge came up really slowly. As you can see it still needs a protective enclosure. Now the tach, speedo, temp and fuel gauges all work. I'll connect the BMS next and try to hook it to the OIL light, through the oil pressure sender.



I'll have to drive it and tune it, but at least for now it says I have gas in the tank. :)